Forum

Author Topic: How to remove/disable photos before dense cloud?  (Read 3164 times)

8ashe

  • Newbie
  • *
  • Posts: 8
    • View Profile
How to remove/disable photos before dense cloud?
« on: March 13, 2019, 09:53:16 AM »
Hello community,

I read the post: https://www.agisoft.com/forum/index.php?topic=5328.0
and I'm still solving this problem.

According to the Post, he said he had disabled photos in the Model view before entering the Dense cloud process.
He said that he reduced the 3500 to 350, but I don't know how.

It seems that there must be a tool to check the overlap of pictures and a selection tool accordingly.
And I do not think I should select manually one by one, but I wonder how to do it.

Any advice is appreciated! I wait for your help.

Movr

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: How to remove/disable photos before dense cloud?
« Reply #1 on: March 13, 2019, 10:00:44 AM »
Hi there.
I believe this is what you are looking for: https://www.agisoft.com/index.php?id=70
Scroll down and look at the "Coverage Optimization"

8ashe

  • Newbie
  • *
  • Posts: 8
    • View Profile
Re: How to remove/disable photos before dense cloud?
« Reply #2 on: March 13, 2019, 10:16:25 AM »
Thank for your prompt reply :)

Unfortunately, the software I am using is not metashape, but photoscan yet. :'(
Could you tell me how to do this in photoscan?

Dave Martin

  • Full Member
  • ***
  • Posts: 170
    • View Profile
Re: How to remove/disable photos before dense cloud?
« Reply #3 on: March 13, 2019, 01:58:39 PM »
8ashe - MetaShape is just version 1.5 of PhotoScan and it is a free upgrade for all licensed PhotoScan users; there are also other advantages to running current version of the software.
If for some reason you are forced to use an old version, it could be useful if you could advise exactly which version that is.
Dave
« Last Edit: March 13, 2019, 02:07:42 PM by Dave Martin »

8ashe

  • Newbie
  • *
  • Posts: 8
    • View Profile
Re: How to remove/disable photos before dense cloud?
« Reply #4 on: March 15, 2019, 03:44:03 AM »
Free upgrade version? Oh, I thought it was a separate software another. I'll try. Thank you.
For now, I'm using the version 1.4.4 or 1.4.5 now :D

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14813
    • View Profile
Re: How to remove/disable photos before dense cloud?
« Reply #5 on: March 15, 2019, 02:14:40 PM »
Optimize Coverage and Plan Motion dialogs will be slightly revised in the upcoming version 1.5.2.
Best regards,
Alexey Pasumansky,
Agisoft LLC