Very bad results on first scan.

[rufinoacosta]

Hello everyone.

I just brought the software and to be honest I am quite frustrated, which for sure, is my own fault, but here we go.

I took a session with a turntable in my own studio using a Cannon 5DSR with a 50mm objective and two continual lights using the turntable method. Masked everything on photoshop and for some reason the best result I got is only half of the item I scanned.

Tried to play a little bit with the align options but best result so far is half of the photos in the front and lower angle, and one foto on the upper angle.

I don't know if the problem is the item being hard to detect, or what, but it's quite frustrating to see results better with a mobile phone or a very bad light settings.

What am I doing wrong? Because I am prety sure is my problem.


I attach pictures with the results on the simple cloud and the photos, in which only takes 23 of the 85 taken.

Help!

[rufinoacosta]

I maybe selected the wrong image, here's a view at the model view with the images and all.

[Mak11]

You should try to do it by only masking one photo (one without the object in it: see here http://www.agisoft.com/index.php?id=49 ) set your tie piont limit to 10000 instead of the default 4000 and Alignement to High (not Highest).

Cheers

[rufinoacosta]

Hello Mak11. Thanks for taking the time to answer, will try that way and will get back.